Наукова електронна бібліотека
періодичних видань НАН України

Перегляд Физическая инженерия поверхности, 2013, № 3 за назвою

Репозиторій DSpace/Manakin

Перегляд Физическая инженерия поверхности, 2013, № 3 за назвою

Сортувати за: Порядок: Результатів:

  • Analyses of fluorapatite prepared by both chemical precipitation and solid phase reaction methods 
    Sayenko, S.Yu.; Shkuropatenko, V.А.; Tarasov, R.V.; Prudyvus, K.А.; Savina, S.А.; Zykova, A.V. (Физическая инженерия поверхности, 2013)
    At the present study the possibility of obtaining two compositions of Ca₁₀(PO₄)₆F₂ and Ca₉Sr(PO₄)₆F₂ fluoroapatites by both chemical deposition from solutions of the initial components and reaction in the solid phase ...
  • Application of electroconsolidation of powder components for production of ultradenced ceramics Al₂O₃ and ZrO₂ (3% Y₂O₃) 
    Sayenko, S.Yu.; Svitlychniy, Eu.O.; Lobach, K.V. (Физическая инженерия поверхности, 2013)
    The possibility of application of electroconsolidation for production of ultradenced ceramics based on Al₂O₃ and ZrO₂ (3% Y₂O₃ ) compounds is studied. As a result of the conducted researches optimum values of process ...
  • Definitions of localized energy states on the quasi-fermi level with changing times 
    Guliamov, G.; Sharibaev, N.Y.; Erkaboev, U.I. (Физическая инженерия поверхности, 2013)
    Studies of the generation-recombination process of electrons from the filled localized surface states at the time of their lives. The applicability of the derivative of the Dirac distribution as δ-function at low ...
  • Magnetron sputtering of high temperature composite ceramics AlN-TiB₂-TiSi₂ 
    Torianik, I.N.; Beresnev, V.M.; Pogrebnjak, A.D.; Sobol, O.V.; Beresneva, Ye.V.; Podcherniaieva, I.A.; Kropotov, A.Yu.; Stiervoiedov, N.G.; Turbin, P.V.; Kolesnikov, D.A.; Grankin, S.S.; Nyemchenko, U.S.; Srebniuk, P.A.; Novikov, V.Yu. (Физическая инженерия поверхности, 2013)
    By means of the magnetron sputtering method using the DC and pulsed voltages applied to the target, the coatings based on AlN-TiB₂-TiSi₂ ceramics were obtained. An amorphous-like structure of the obtained coatings was ...
  • Optical properties of dysprosium monoantimonide thin films 
    Tabatadze, I.G.; Jabua, Z.U.; Gigineishvili, A.V. (Физическая инженерия поверхности, 2013)
    A process has been developed for the growth of thin crystalline DySb films by thermal evaporation using Dy and Sb separate sourses. The room-temperature optical spectra (reflection and absorption, the real and the imaginary ...
  • Purification of hafnium from oxygen and nitrogen 
    Pylypenko, M.M.; Drobyshevskaya, A.A. (Физическая инженерия поверхности, 2013)
    Data on the influence content of interstitial impurities on the mechanical properties of hafnium are presented in this work. Investigations the purification of hafnium from oxygen at added of aluminum on the melting ...
  • Silicide coatings structure optimization based on multiscale approach 
    Lytovchenko, S.V.; Beresnev, V.M.; Chyshkala, V.A.; Dmytrenko, A.Ye.; Nyemchenko, U.S.; Burkovska, V.V. (Физическая инженерия поверхности, 2013)
    This paper is an attempt to apply the multi-scale approach to the study of silicide coatings on molybdenum. Macro- and microstructure of silicide coatings largely determines mechanical and corrosion properties of ...
  • The injection photo diode on the basis of nSi-nCdS-n⁺CdS heterostructures 
    Sapaev, I.B. (Физическая инженерия поверхности, 2013)
    It is shown that the nSi-nCdS-n⁺CdS heterostructures in operative (carrying) direction of current, while being exposed to low intensity radiation, operate as injection photodiodes. Their current sensitivity is Sλ ≈ ...
  • The temperature dependence of the band GAPSi 
    Guliamov, G.; Erkaboev, U.I.; Sharibaev, N.Y. (Физическая инженерия поверхности, 2013)
    With the help of mathematical modeling of the thermal broadening of the energy levels studied the temperature dependence of the band gap semiconductors. In view of the temperature dependence of the effective mass of the ...
  • Use of the determined properties of a roughness of a surface in measurement of a geometrical form of object 
    Dzubenko, M.I.; Kolpakov, S.N.; Popov, I.V.; Pryyomko, A.A. (Физическая инженерия поверхности, 2013)
    Classification of surfaces as roughness is carried out. The roughness can have the determined, stochastic or chaotic character, depending on a method of their forming. In the work the problem of finding of normal vector ...
  • Правила оформления статей 
    Автор відсутній (Физическая инженерия поверхности, 2013)
  • Тематические направления 
    Автор відсутній (Физическая инженерия поверхности, 2013)
  • Титульная страница и содержание 
    Автор відсутній (Физическая инженерия поверхности, 2013)

Пошук


Розширений пошук

Перегляд

Мій обліковий запис