ЗМІСТ

Kamonchaivanich K., Kuboyama K., Ougizawa T.
FEM Analysis and Experimental Study on the Bending Strength of Ceramic Tiles with the Top- and Back-Sided Polyurea Coating

Ye X.F., Ogai H., Kim C.W.
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment

Alisjahbana S.W., Safrilah, Putra J.C.P., Asmi A., Alisjahbana I., Kiryu S., Gan B.S.
Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander Load

Zhang C.C., Yang X.H., Gao H.
XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending

Zhang J., Ma L., Zhang Z.X.
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading

Long Y.C., Yu C.T.
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model

Tian Z.G., An X.Y., Yang Y., Zhao L.K.
Dynamic Stress Analysis of a Composite Electromagnetic Track

Sheng L.Y., Jiao J.K., Lai C.
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel

Wang X.R., Yin B.Y., Luo W.B.
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness

Wan Z., Song C.C., Gao W.S.
Elastoplastic Model of Sand under Complex Loading

Luo W.B., Liu Y.P., Yin B.Y., Li Y., Liu X.
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth

Yimit M., Ni L., Du Y., Bkan R.
Mechanical and Aging Properties of Polypropylene and Styrene-Butadiene-Styrene Composites under Outdoor and Indoor Conditions

Wang Y.Q., Cheng P., Liu X.S., Bao Y.J., Gao H.
Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis

Shen L.L., Shen Z.B., Cui H.R., Li H.Y., Zhi S.J.
Effect of the Interfacial Transition Zone on Basic Mechanical Properties of a Solid Composite Propellant

Li S., Zhang Q.D., Liu J.Y.
Coupled Deformation and Diffusion Process at the Stainless Steel/Carbon Steel Interface in the Deformation Bonding Process

Sheng L.Y., Wang F.Y., Wang Q., Jiao J.K.
Shear Strength Optimization of Laser-Joined Polyphenylene Sulfide-Based CFRTP and Stainless Steel

*******
Рефераты