Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping

dc.contributor.author	Zhang, Z.Q.
dc.contributor.author	Jia, X.F.
dc.contributor.author	Wang, Y.J.
dc.contributor.author	Gao, P.
dc.date.accessioned	2020-12-03T20:41:10Z
dc.date.available	2020-12-03T20:41:10Z
dc.date.issued	2016
dc.identifier.citation	Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping / Z.Q. Zhang, X.F. Jia, Y.J. Wang, P. Gao // Проблемы прочности. — 2016. — № 1. — С. 91-96. — Бібліогр.: 11 назв. — англ.	uk_UA
dc.identifier.issn	0556-171X
dc.identifier.uri	http://dspace.nbuv.gov.ua/handle/123456789/173421
dc.description.abstract	Based on the principle of hot stamping, a simulation model of hot stamping was established. The blank contour line of U part was optimized by using a multiple iterative algorithm. By comparison with the simulation and experimental data, the multiple iterative optimization algorithm was verified. Moreover, the blank contour lines of a bumper and the B-pillar of Numisheet 2008 were optimized. The result showed that the multiple iterative method for optimizing initial blank contour line had high calculating speed and precision. The hot stamping parts’ contour lines match the ideal part contour lines quite well.	uk_UA
dc.description.sponsorship	This work was supported by the National Natural Science Foundation of China (Nos. 51205162 and 51275203).	uk_UA
dc.language.iso	en	uk_UA
dc.publisher	Інститут проблем міцності ім. Г.С. Писаренко НАН України	uk_UA
dc.relation.ispartof	Проблемы прочности
dc.subject	Научно-технический раздел	uk_UA
dc.title	Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping	uk_UA
dc.title.alternative	Анализ оптимизации начальной контурной линии листового металла для высокопрочной борсодержащей стали при горячей штамповке	uk_UA
dc.type	Article	uk_UA
dc.status	published earlier	uk_UA
dc.identifier.udc	539.4