ЗМІСТ

Ji S.D., Li Z.W., Ma L., Yue Y.M., Gao S.S.
Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy

Liu Y.Q., Shang Q.H., Zhang D.H., Wang Y.X., Sun T.T.
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed

Yang K., Zhang L.G., Yue Y.M., Guo X.Q.
Effect of mold fixture on stress and deformation of composite structure [Стаття відсутня]

Yang Y.L., Zhan L.H., Xu X.L.
Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process

Lee D.S., Kwon Y.D., Han J.S.
Design Optimization for Shear Key on the TF Coil Structure of the KSTAR Tokamak

Deng Y., Yin Z.M., Xu G.F., Wang Y.J., Lu L.Y., Duan J.Q.
Effects of Sc and Zr on the texture and mechanical anisotropy of high strength Al - Zn - Mg alloy sheets

Li D., Wang H.C., Wu L.X.
Dynamic Stress Intensity Factor for Interfacial Cracks of Mode III Emanating from Circular Cavities in Piezoelectric Bimaterials

Cui A.Y., Hu F.Y., Wei H.K., Liu H.D., Wang Z., Dong X.L.
Research on Rapidly Shaped Charge Cutting Technology of Aircraft Damaged Thin-Wall Structure

Zhao Z., Jing L., Pei Q., Ma H.W., Wang Z.H.
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete

Zhou P., Zhou J.Q., Ye Z.X., Jiang E., Hu W.B., Le H.L.
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy

Zhang Z.Q., Jia X.F., Wang Y.J., Gao P.
Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping

Chang B.H., Yin J.P., Cui Z.Q., Liu T.X.
Improved Dynamic Mechanical Properties of Modified PTFE Jet Penetrating Charge with Shell

Yang B., Ma B.Q., Xiao S.N., Zhao Y.X.
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel

Huang S.H., Chai S.X., Xia X.S., Chen Q., Shu D.Y.
Compression Deformation Behavior and Processing Map of Pure Copper

Sheng L.Y.
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy

Kim J.W.
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic

Song X., Li Z.Y., Shen Y., Chen Y.L., Zhang J.Z.
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios

Yang B., Ma B.Q., Wu Y.Y., Chen B., Xiao S.N., Yang G.W., Zhu T.
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction

Sun F.Q., Liu J.C., Cao Z.Q., Li X.Y., Jiang T.M.
Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT

Bang HanSur, Bang HeeSeon, Na M.-J., Jeon G.-H., Kim G.-S., Kim B.-R.
Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel

Bang HanSur, Bang HeeSeon, Hong J.-H., Jeon G.-H., Kim G.-S., Kaplan A.F.H.
Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel

Kim C.S.
Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants

Li G.H., Wang W.J., Jing Z.J., Ma X.C., Zuo L.B.
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads

Tian J.
The Sources and Affecting Factors of Creep Threshold Stress of Magnesium Based Composite

Huang T., Liu Z.C., Wang Y.L.
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates