Домашня сторінка
→
Фізико-технічні та математичні науки
→
Відділення механіки
→
Проблемы прочности
→
Прoблемы прочности, 2013
→
Проблемы прочности, 2013, № 6
→
Перегляд Проблемы прочности, 2013, № 6 за назвою

Перегляд Проблемы прочности, 2013, № 6 за назвою

Результати 1-16 з 16

Abstracts

Автор відсутній (Проблемы прочности, 2013)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars

Buyukkaragoz, A.; Kalkan, I.; Lee, J.H. (Проблемы прочности, 2013)

In this study, analytical and numerical investigations were extensively conducted to evaluate the flexural behavior of concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) rebars. The AFRP-reinforced ...
Estimating the Generalized Exponential Distribution Parameters and the Acceleration Factor under Constant-Stress Partially Accelerated Life Testing with Type-II Censoring

Ismail, A.A. (Проблемы прочности, 2013)

Accelerated life testing (ALT) and partially accelerated life testing (PALT) are frequently used in modern reliability engineering. ALT and PALT are run to obtain information on the life of the products and materials ...
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density

Torabi, A.R.; Bertoh, F. (Проблемы прочности, 2013)

The main aim of the present work is to check the suitability of the brittle fracture model, namely the local strain energy density (SED), in predicting the experimental results on mode I fracture of blunt V-notched ...
Generation and Validation of Crack Growth Resistance Curve from DCB Specimens: An Experimental Study

Alfred Franklin, V.; Christopher, T. (Проблемы прочности, 2013)

This article examines fracture toughness and interlaminar failure load of double cantilever beam (DCB) specimens made of glass/epoxy of three different lay-ups. The present model requires the applied load–displacement ...
Microstructural Features and Mechanical Properties of Artificially Aged AA2024

Naveed Afzal; Tariq Shah; Ahmad, R. (Проблемы прочности, 2013)

Microstructural features and mechanical properties of Al–Cu–Mg alloy (AA2024) were examined after aging the alloy between 105–195°C for various durations. One set of the specimens was aged at 105, 135, 165, and 195°C ...
Morphology and Mechanical Properties of PP/LLDPE Blends and Ternary PP/LLDPE/nano-CaCO₃ Composites

Cheraghi, H.; Ghasemi, F.A.; Payganeh, G. (Проблемы прочности, 2013)

Mechanical and morphological properties of polypropylene (PP)/linear low density polyethylene (LLDPE)/ nano-sized calcium carbonate ternary composites were prepared using a twin-screw extruder. Modification of the ...
Orthotropic Material and Anisotropic Damage Mechanics Approach for Numerically Seismic Assessment of Arch Dam-Reservoir-Foundation System

Hariri-Ardebili, M.A.; Mirzabozorg, H. (Проблемы прочности, 2013)

In contrast with modeling of the contraction joints, the performance and influence of lift joints are usually neglected in numerical analysis of concrete arch dams. In this paper, the seismic nonlinear response of a ...
Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/H I PN/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 2. Studies on Flexural, Compression, and Impact Strength

Rostamiyan, Y.; Fereidoon, A.B.; Omrani, A.; Ganji, D.D. (Проблемы прочности, 2013)

In spite of good tensile strength of epoxy resins, they have brittle nature and show poor resistance to crack propagation. In view of enhancing mechanical strength and fracture toughness of epoxy-based nanocomposite ...
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading

Czechowski, L.; Kowal-Michalska, K. (Проблемы прочности, 2013)

In the paper, the buckling phenomenon for static and dynamic loading (pulse of finite duration) of functionally graded plates subjected to uniform temperature increment is presented. The work deals with thin rectangular ...
Study of the Effect of Different Industrial Coating with Microscale Thickness on the CK45 Steel by Experimental and Finite Element Methods

Kashvzadeh, K.R.; Arghavan, A. (Проблемы прочности, 2013)

This article is aimed at analyzing the effects of industrial coatings of hardened chromium, trim chromium, hardened nickel and warm-galvanization with a thin structure and dimensions in micron scale, on fatigue endurance ...
Study of the Effect of Water Intake by the Matrix on the Optimization of the Fiber Matrix Interface Damage for a Composite Material by Genetic Algorithms

Temimi Lahouari, H.; Allel, M.; Belkaid, N.; Boutaous, A.; Bnuamrane, R. (Проблемы прочности, 2013)

The objective of this paper is study the influence of the matrix swelling due to water on the damage of the fiber matrix interface of a composite material. The results obtained by a genetic approach based on Weibull ...
Авторский указатель за 2013 год

Автор відсутній (Проблемы прочности, 2013)
Правила оформления статей

Автор відсутній (Проблемы прочности, 2013)
Титульные страницы и содержание

Автор відсутній (Проблемы прочности, 2013)
Указатель статей за 2013 год

Автор відсутній (Проблемы прочности, 2013)

Результати 1-16 з 16

Пошук

Розширений пошук

Перегляд

Вся бібліотека
Колекція

Перегляд Проблемы прочности, 2013, № 6 за назвою

Репозиторій DSpace/Manakin

Перегляд Проблемы прочности, 2013, № 6 за назвою

Пошук

Перегляд

Вся бібліотека

Колекція

Мій обліковий запис