Перегляд Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009, вип. 12 за темою "Породоразрушающий инструмент из сверхтвердых материалов и технология его применения"
-
Свешников, И.А.; Майстренко, А.Л.; Заболотный, С.Д.; Беспалов, С.Ф.; Доброскокин, А.И.; Городецкий, В.Г.; Осадчук, Н.П.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
It is experimentally established, that the tool of ISM design effectively works to depth of cutting of 8 mm., thus minimum power consumption of destruction of breed is observed at a step of
cutting Тр = 60 mm. Necessary ...
-
Кожевников, А.А.; Кузин, Ю.Л.; Гриняк, А.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The change of hydraulic pressure in connection with the increase of
thickness of wall of boring column in lower part is considered. The
analysis of formula showed that constituent from the
difference of areas of ...
-
Панов, А.В.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
Influence of a material of a matrix on mechanical characteristics of a drilling mill is investigated. It is shown, that replacement of a standard material positively influences speed of milling of
a drilling mill.
-
Бондаренко, М.О.; Мечник, В.А.; Ткач, С.В.; Супрун, М.В.; Казьмін, О.О.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The paper investigates the structure and the mechanic features of composite system diamond-Fe-Cu-Ni-Sn-CrB2, was sintered in a muffle furnace. The research determine, that a building
of metal zone near the diamond has ...
-
Бондаренко, М.О.; Коростишевський, Д.Л.; Супрун, М.В.; Мечник, В.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
Influence of duration of hot pressing on kinetics of contraction of structuring in system diamond-Fe-Cu-Ni-Sn-CrB2 is investigated. It is proved, that optimization p-T-t hot pressing conditions allows receiving composites ...
-
Будюков, Ю.Е.; Власюк, В.И.; Анненков, А.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
Results researches of process rock failure are describe in this article. It is very important for choice rational construction elements of drill bit.
-
Давиденко, А.Н.; Камышацкий, А.Ф.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The results of experimental researches of cavitations treatment of washings liquids of the
mining holes applied at the boring drilling are resulted
-
Бондаренко, Н.А.; Кущ, В.И.; Казьмин, А.О.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The paper subscribes an experimental invastigation of a diamond bouring insert themperature subject to factors of drilling mode. The paper contains plots of themperature against a pressure, type of formations and velocity.
-
Бондаренко, Н.А.; Коростышевский, Д.Л.; Мечник, В.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The results of experimental modeling of process of chafing of diamond-bearing composites
sintering on standard production engineering and with additives of refractory joints are resulted.
The gained results have affirmed ...
-
Мартыненко, И.И.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
-
Богаченко, А.Г.; Линенко-Мельников, Ю.П.; Мельник, В.И.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The technology of producing the sparsely-alloyed steels capable to quenching at a delayed cooling, has been developed on the basis of electroslag crucible melting of used drill bits. The new steels were tested in the ...
-
Гошовский, С.В.; Васюк, Б.Н.; Штефан, Р.Ю.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The new core lifter for marine drilling is considered. The especially of this lifter is effective
work by percussion and rotary drilling.
-
Бочковский, А.М.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
It is shown, that equipment of boring tools by inserts of the cylindrical form results in uneven equipment and uneven wear of a working part. The form of wear of a working surface repeats
the form of a curve of factor ...
-
Лукинов, В.В.; Безручко, К.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The technique of a rocks gas content estimation in the volume expansion zones generated
under the influence of natural and tehnogenic processes, including local anticline structures, is
offer.
-
Свешников, И.А.; Стасюк, Л.Ф.; Заболотный, С.Д.; Смекаленко, С.В.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The new method of an estimation of wear resistance ATP is developed, allowing to predict
their working capacity. Tests of new updatings of ATP with height diamond layer to 1,8 mm, developed in ISM are conducted. Influence ...
-
Линенко-Мельников, Ю.П.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
In the article the specified data defining the properties of rocks in a bore-hole based on the
coefficient of percussion drill ability К are resulted in view of the disturbers caused by the arisen
zone of residual ...
-
Калиниченко, О.И.; Каракозов, А.А.; Зыбинский, П.В.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The results of development of new equipment and technologies for offshore cone penetration
testing (CPT) for different kinds of vessels are presented
-
Калиниченко, О.И.; Комар, П.Л.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
This work reviews new schemes of percussive tools for releasing of stuck pipes in drillholes
-
Пащенко, А.А.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
The method of determination of type of curvilinear formative is considered, to on the
method of tearing away of element from a massive.
-
Лебедев, В.Я.; Бабич, В.Е.
(Породоразрушающий и металлообрабатывающий инструмент – техника и технология его изготовления и применения, 2009)
Using processing of rotary cutting tools of cutter loaders and heading machines as an example it is shown that magnetic-abrasive machining ensures improvement of microgeometry and
physicomechanical characteristics of ...