ЗМІСТ

Li J., Jia Y., Shen N., Yu Z., Zhang W.
Effect of Grinding Conditions of a TC4 Titanium Alloy on Its Residual Surface Stresses

Guo N., Yang Z., Wang M., Yuan X., Feng J.
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint

Yusuf O.T., Gang Z., Wei W., Onuh S.O.
Simulation Based on Trivariate NURBS and Isogeometric Analysis of a Spur Gear

Zhao Y.Q., Mao J.H., Liu F.F., Mac Zh.H.
Experiments and Simulation on Mannesmann Piercing Process in the Drill Steel Manufacture

Zhang L., Zhang J.F., Wang Z.Q., Zhou L.M.
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters

Lv Y.H., Gai D.Y., Song Y.Q., Ma X.Q.
Effect of Carburizing and Shot Peening on the Microstructure and Surface Properties of 17-CrNi6-Mo Steel

Guo J.T., Li S.F., Feng L.
Distribution of Contact Pressures between the Pivoting Support and Tracks for Super Cranes

Cao D.F., Liu L.S., Liu Q.W., Li S.X.
Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading

Yao X., Zheng C.
Shaking-Swing Coupled Vibration Analysis of a Laminar Composite Rotating Blade by the Finite Element Method

Chen W.J., Chen H., Wu B.X.
Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys

Li H., Dai Q.-L., Shi Q.-Y.
Experimental Study on the Heterogeneity of Mechanical Properties of Friction Stir Welded Joints with the Digital Image Correlation Method

Wang J.H., Li G., Liu Z.F., Zhao Y.S., Cheng Z.J., Liu J.Y., Li Y.
Studies of Static and Dynamic Characteristics of the EDM Machine Based on the ANSYS Workbench

Zhang R.H., Wang Z.H., Shi Z.P., Wang B., Fu W.T.
Dynamic and Postdeformation Recrystallization of Nuclear-Grade 316LN Stainless Steel

Xue F., Yu W., Yu M., Liu W., Shu G.
Long-Term Aging Effect on the Crack Growth in the of Main Circulating Pump Casing Material

Lin Y.L., Li X.X., Zhang J.
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading

Yang B., Ma B.Q., Zhao Y.X., Xiao S.N.
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel

Chen D.C., You C.S.
Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy

Zhang L., Shang H.C., Zhao Z.Q., Zhang D.F.
Evaluation of the Dynamic Characteristics of AZ91D Crankcase Covers and Boxes

Wen H., Yang F., Lv W.Q., Chen Y.X., Wang Q.W.
Finite Element Analysis of the Temperature Field of an Emergency Brake and Study of its Thermal Properties

Guo C.H., Zhan Z.J., Zhang D.D.
nfluence of Different Preparation Processes on the Mechanical Properties of Carbon Nanotube-Reinforced Copper Matrix Composites

Tang C., Liu Z., Zhou D., Wu S.
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel

Tan Z.H., Liu L.S., Sun Y.S., Cho C.
Response of an Indented Square Tube under Impact Loading

Chen Y.X., Yang C.D., Wang X.J., Chen S.B.
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel

Liu Y., Zhou H., Yang C.Y., Cheng J.Y.
Thermal Fatigue Resistance of Bionic Compacted Graphite Cast Iron Treated with the Twice Laser Process in Water

Lee J.-Y., Kim K.-H., Kim S.-W., Choi H.
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads

Her S.-C., Su W.-B.
Interfacial Fracture Toughness of Multilayer Composite Structures

Bi Z.W., Huang W.F., Xiao G.X.
Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading

Ji S.J., Yu H.J., Zhao J., Liang F.S.
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone

Wei Y.F., Fu W.X., Nie D.X.
Nonlinearity of the Rock Joint Shear Strength

Bang HanSur, Bang HeeSeon, Ro ChanSeung, Jeong SuOk
Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes

*******
Рефераты

Международная научно-техническая конференция “Конструкционная прочность материалов и ресурс оборудования АЭС” (Ресурс-2015)