http://dspace.nbuv.gov.ua:80/handle/123456789/74120 2026-04-15T12:45:47Z 2026-04-15T12:45:47Z Beloglazov, V.I. Dovbush, L.S. Myakushko, L.K. Otlev, M.V. Reprintsev, L.V. Romasko, V.P. Tur, Yu.D. Vishnyakov, V.A. Zakutin, V.V. http://dspace.nbuv.gov.ua:80/handle/123456789/81539 2015-05-18T00:02:23Z 1999-01-01T00:00:00Z

Injector of the linac LU-20 Beloglazov, V.I.; Dovbush, L.S.; Myakushko, L.K.; Otlev, M.V.; Reprintsev, L.V.; Romasko, V.P.; Tur, Yu.D.; Vishnyakov, V.A.; Zakutin, V.V. The investigation have shown that the HV diode guns in combination with the forming system (collimator, deflector, buncher) are the most suitable for the use in injector accelerating structures with a high-power beam. The injector has been assembled with the linac and has been tested. In 1999 the injector had 1400 hours of operating time without accidents. The main parameters of the gun were 110 keV and 1.1 A.

1999-01-01T00:00:00Z Pugachev, G.D. Popenko, V.A. http://dspace.nbuv.gov.ua:80/handle/123456789/81538 2015-05-18T00:02:16Z 1999-01-01T00:00:00Z

Radiation protection of the electron linear accelerator in production of ⁹⁹Mo Pugachev, G.D.; Popenko, V.A.

1999-01-01T00:00:00Z Gordeev, V.S. http://dspace.nbuv.gov.ua:80/handle/123456789/81537 2015-05-18T00:02:22Z 1999-01-01T00:00:00Z

Schemes of high-voltage pulse shapers on the basis of stepped transmition lines for high-current accelerators Gordeev, V.S. The systems of high-voltage pulses formation in the majority of high-current accelerators with pulse duration from several to hundreds ns are designed on the basis of single or double pulse forming lines. The disadvantage of these systems consists for a number of applications in the relatively low output voltage equal in the matched mode for a double forming line to the charging voltage while for a single line – only to a half of this value.

1999-01-01T00:00:00Z Sakhno, V.I. http://dspace.nbuv.gov.ua:80/handle/123456789/81536 2015-05-18T00:02:13Z 1999-01-01T00:00:00Z

The beam diagnostic system at the radiative-technological facility with linear electron accelerator Sakhno, V.I. The main purpose of the production technology is the receiving the materials (production) with specific properties. The radiative technologies belong to the science intensive ones and allow to realize processes, which depend on the exact numerous parameters and ensure the stable production characteristics. The modern radiation technologies engage thin effects of the substance transformation to the manufacture and allow to create unique production.

1999-01-01T00:00:00Z